Zigbee Repeater, Zigbee Router, Works with All Zigbee 3.0 Hub

This Zigbee repeater extends the range of your Zigbee network, ensuring a stable connection for all your smart devices. Works with SmartThings, Home Assistant, Zigbee2MQTT, Tuya and any other Zigbee 3.0 hub.

Device Pairing Instructions

1. Factory Pairing Mode:

When the device is shipped from the factory, it is already in pairing mode, indicated by a flashing red LED light. In this state, you can directly connect it to the gateway.

2. Manual Pairing Mode:

If the red LED is solid, open the device cover and press and hold the button for more than 5 seconds until the red LED starts flashing. This will put the device into pairing mode.

3. Alternative Pairing Method:

Alternatively, you can power cycle the device five times. To do this, turn off the power, wait a few seconds, and then turn it back on. Repeat this process five times until the red LED starts flashing, indicating that the device is in pairing mode.

Once the device is in pairing mode, you can follow the instructions in your gateway's user manual to add it to your Zigbee network.